WC3 movies

[Hellcatz]

The game installs fine, even when asked what type of sound card to use for Music and Digital FX (I choose SoundBlaster Compatible) both are tested successfully. However when I start the game the movies start then stop after a second, so I reinstalled the game and choose no sound no music and the movies ran fine but of course there's no sound in the game. By the way I'm running the game in Windows. So my question is, what do I do to run the movies fine as well as hear music/sounds?
Also, here's my readouts when I right click My Computer, go to Devices and choose the Resources tab for my sound card (Which is a SBLive! btw):
Iterrupt Request = 05
Input/Output Range = FF80-FF9F


And that's all that's there.
Lastly the rest of my sys specs:
AMD Anthon 750Mz processor
GeForce 64MB Vid Card
384MB RAM

Think those are the essentials that need to be said. Anyways thanks in advance

 

[cff]

Your IO/Range seems to be doubtful. The oriiginal SB was located at 220-22F.

FF80-FF9F seems awfully high and probably will confuse every DOS game. If possible try that 220-22F range and see if it helps.

 

[Hellcatz]

Well apparently I was already telling the game to use an I/O Range of 220, then choosing 5 for the next option it gives me and finally a 1 under Digital DMA (all of these when I choose to use SoundBlaster Compatitable). The sound test worked fine but the game will still play a movie for one sec then freeze up. And like I said the game runs smoothly when music/FX are turned off.